The World's First 60W MOPA + 40W Diode Dual Laser Machine
The xTool F2 Ultra breaks ground as the first machine to pair a true 60W MOPA fiber laser with a 40W diode laser in a single enclosed desktop form factor. Previous dual-laser machines maxed out at 20W fiber power. The F2 Ultra's 60W MOPA is three times that, unlocking capabilities — full-spectrum color metal marking, 3D deep embossing, and 2mm metal cutting — that were previously reserved for standalone industrial fiber systems costing far more.
Everything about the F2 Ultra is oriented toward production: dual 48MP AI cameras that align automatically, an enclosed housing with fire detection and auto-stop, a software workflow built for batch jobs, and an optional Auto Streamline™ conveyor that turns it into an automated production line. It's designed for makers and small businesses who need to fulfill real orders, not just prototype ideas.
What Is MOPA — And Why Does 60W Change Everything?
MOPA stands for Master Oscillator Power Amplifier. Unlike a standard Q-switched fiber laser (like the one in the xTool F1 Ultra), a MOPA laser allows independent control of both pulse width (nanoseconds) and pulse frequency (kHz). This combination gives the user a level of engraving control that Q-switched lasers physically cannot replicate.
In practical terms: a MOPA produces over 100 consistent colors on stainless steel and titanium by varying pulse parameters — different combinations create different surface oxide layers that reflect light at different wavelengths. A Q-switched fiber produces black marks on metal. It cannot produce color. This is the fundamental reason the F2 Ultra exists: color metal marking at professional quality and speed is a MOPA-exclusive capability.
The 60W power level matters because it scales everything: 3D embossing jobs that take 30–60 minutes on a 20W fiber run in 6–12 minutes on the F2 Ultra. Metal cutting at 2mm is possible because the power density is sufficient to ablate through the material. The dual 48MP AI cameras use the machine's compute resources to auto-recognize material and suggest settings — removing one of the biggest sources of trial-and-error waste in production workflows.
Full Specifications
| Specification | xTool F2 Ultra (Dual) |
|---|---|
| MOPA Fiber Laser | 60W · 1064nm · adjustable pulse width & frequency |
| Diode Laser | 40W · 455nm blue |
| Max Engraving Speed | 15,000mm/s |
| Engraving Accuracy | 0.00199mm |
| Camera System | Dual 48MP AI cameras · 0.2mm positioning accuracy |
| Work Area (standard) | 220 × 220mm (8.7" × 8.7") |
| Work Area (with conveyor) | 220 × 500mm — automated batch expansion |
| Metal Cutting (MOPA) | Brass 2mm · Stainless Steel 2mm · Aluminum 1mm |
| Wood Cutting (Diode) | 23mm basswood / plywood |
| Acrylic Cutting (Diode) | 20mm black acrylic |
| Color Marking | 100+ consistent colors · 7 color spectrums · stainless steel & titanium |
| MOPA Capabilities | Color marking · 3D deep embossing · deep engraving · metal cutting · laser cleaning · thin metal welding · black marking on aluminum |
| Safety Class | Class 4 — fully enclosed housing, fire detection auto-stop, eye-protection cover |
| Software | xTool Creative Space (XCS) — AI-powered · Not LightBurn compatible |
| AI Features | Auto material recognition · AI parameter setting · AI 3D engraving depth control |
| Production Features | Auto Streamline™ Conveyor (optional) · RA2 Pro rotary (optional) · foot pedal switch (optional) |
| Maintenance | Front-accessible removable fan cover — tool-free cleaning |
| Price (approx.) | ~$6,499 (Dual) · ~$4,999 (Single MOPA only) · Deluxe Bundle available |
60W MOPA: Five Distinct Laser Capabilities in One System
The F2 Ultra's 60W MOPA is not a single-trick engraving laser. By adjusting pulse width (nanoseconds) and pulse frequency (kHz) independently, the same machine performs five fundamentally different processes: full-color marking on metals spanning 7 spectral bands and 100+ shades; 3D deep embossing with layered relief carving up to 5× faster than 20W fiber; precision deep engraving in hard metals; thin metal cutting up to 2mm; and laser surface cleaning to remove oxidation and coatings.
The 40W diode module handles the organic materials — 23mm basswood, 20mm black acrylic, leather, fabric, paper, bamboo, rubber — that the MOPA would simply burn through without the fine control needed for surface quality. The two systems are genuinely complementary, not redundant.
Six Capabilities That Define the F2 Ultra
100+ Color Metal Marking
MOPA-exclusive. Over 100 consistent colors across 7 spectrums on stainless steel and titanium. Richer tones, finer gradients, and holographic effects — none achievable with Q-switched fiber or diode lasers.
3D Deep Embossing — 5× Faster
A 1mm name necklace takes 6 minutes. Metal coin embossing jobs that run 30–60 min on 20W fiber complete in 6–12 min at 60W. The removable front fan cover makes post-embossing brass powder cleanup fast and tool-free.
2mm Metal Cutting
Cut brass up to 2mm, stainless steel up to 2mm, and aluminum up to 1mm — enabling custom metal jewelry blanks, name necklaces, decorative sheet work, and industrial parts directly from the desktop.
Dual 48MP AI Cameras
Two cameras deliver 0.2mm positioning accuracy — 60% better than single-camera systems. AI auto-recognizes materials and suggests settings. Live preview shows exactly where the job will fall before the laser fires.
Auto Streamline™ Conveyor
Optional conveyor expands the work area from 220×220mm to 220×500mm and automates batch feeding. Load a tray, press run, walk away. Designed for bulk orders of dog tags, keychains, jewelry, and small product batches.
23mm Wood · 20mm Acrylic Cut
The 40W diode handles thick organic materials. 23mm basswood, 20mm black acrylic, leather, fabric, bamboo, and paper — all within the same enclosed machine, no second setup required.
Cutting & Engraving Performance
Color Engraving on Metal: What 60W MOPA Makes Possible
Color engraving on metal is a MOPA-exclusive process: by precisely modulating pulse width and frequency, the laser creates different surface oxide layers on stainless steel and titanium that reflect different wavelengths of visible light. The F2 Ultra's 60W output and advanced optical system produce over 100 consistent colors across 7 color spectrums — from deep blacks and grays through blues, greens, golds, reds, and violet tones. XCS software includes pre-set color files that map pulse parameters to expected colors, making repeatable color production accessible without deep laser physics knowledge.
The 0.00199mm engraving accuracy means fine detail work — portrait engraving, micro-text on jewelry, intricate logo marks — is within the machine's capability. The dual 48MP cameras capture a live preview before the laser fires, showing exactly where the design will land on the workpiece, eliminating the positional errors that make small-item work frustrating on systems with lesser camera setups.
Material Compatibility
60W MOPA Fiber (1064nm) — Metals & Advanced Processes
40W Diode (455nm) — Organic & Non-Metal Materials
Built for Small Business Production
The F2 Ultra is xTool's most production-oriented machine to date. The AI-driven workflow in XCS reduces setup friction: material is detected by camera, parameters are suggested automatically, and the dual 48MP cameras preview exact placement before any laser fires. For high-volume jewelry work — name necklaces, custom rings, engraved dog tags, branded merchandise — this reduces per-piece setup time dramatically.
The Auto Streamline™ conveyor turns the machine into an automated line for batch work. Load a tray of blanks, set the design array in XCS, and run the job unattended while preparing the next tray. For businesses fulfilling 50–300 piece orders, this automation pays back quickly in labor cost reduction and consistency.
How Does the F2 Ultra Compare?
The F2 Ultra's most natural comparisons are its siblings in xTool's own F lineup and its closest independent competitor, the Sculpfun G9. Here's how the key specs align:
| Feature | F2 Ultra (Dual) ★ | xTool F1 Ultra | xTool F2 (15W+5W) | Sculpfun G9 |
|---|---|---|---|---|
| Primary Laser | 60W MOPA | 20W Fiber (Q-sw.) | 5W IR Diode | 2W IR (1064nm) |
| Diode | 40W | 20W | 15W | 10W |
| Color Metal Marking | ✓ 100+ colors (MOPA) | ✗ (Q-switched) | ✗ (IR diode) | ✗ (IR diode) |
| Metal Cutting | SS 2mm · Brass 2mm | SS 0.3mm · Brass 0.4mm | ✗ | ✗ |
| Max Speed | 15,000mm/s | 10,000mm/s | 6,000mm/s | 5,000mm/s |
| Camera System | Dual 48MP · 0.2mm | Single · 0.3mm | Single 50MP | Electric focus only |
| Work Area | 220×220mm (→500mm) | 115×115mm (→ext.) | 115×115mm (→ext.) | 105×105mm (→×3.5) |
| Auto Conveyor | ✓ Auto Streamline™ | ✓ compatible | ✗ | ✗ |
| LightBurn | ✗ XCS only | ✓ | ✓ | ✓ (Pro) |
| Price (approx.) | ~$6,499 | ~$3,599 | ~$1,299 | Check laserbuying.com |
The F2 Ultra is in a class by itself on color metal marking and metal cutting depth — capabilities that are MOPA-exclusive and simply do not exist on Q-switched fiber or IR diode machines at any power level. The F1 Ultra and Sculpfun G9 are stronger value propositions for users who primarily need metal engraving without color and don't need 2mm metal cutting. The xTool F2 portable is the choice for on-site personalization work. The F2 Ultra's price premium buys exactly one thing that no other machine offers: full-spectrum MOPA color marking at 15,000mm/s in a production-capable enclosed form factor.
Who Should Buy the xTool F2 Ultra?
Jewelry & Color Metal Businesses
100+ MOPA colors on stainless steel and titanium open entirely new product categories: rainbow titanium jewelry, color-gradient dog tags, holographic logo marks on metal. No other desktop machine produces this.
High-Volume Production Shops
15,000mm/s speed, Auto Streamline™ conveyor, and AI batch workflows reduce per-piece time to seconds. Fulfilling 100–300 piece orders of personalized metal gifts, branded merchandise, or industrial labels becomes viable with one machine.
Metal Cutting & Fabricators
2mm brass and stainless steel cutting capability enables custom metal jewelry blanks, name necklaces, decorative sheet components, and thin metal parts — processes that previously required a separate fiber cutting machine.
Premium Gift & Personalization SMBs
The F2 Ultra covers every medium a personalization business needs: engraved metals, cut wood, acrylic signs, leather accessories, and glass trophies — in a single enclosed machine that fits a store counter or studio desk.
Awards & Trophy Makers
3D embossing at 60W creates raised relief designs on coins, medals, and award plaques that are impossible to replicate with surface-level engraving. Combined with color marking, the F2 Ultra produces trophy-grade output at production speed.
Industrial Marking & Compliance
Permanent, wash-resistant marks on stainless steel, aluminum, and ABS/PC plastics for serial numbers, QR codes, compliance labels, and part traceability. MOPA precision enables micro-text legible with a loupe on parts smaller than a fingernail.
Pros & Cons
✔ Pros
- Only desktop machine with 100+ MOPA color marking on metal
- 60W enables 2mm metal cutting — SS, brass, aluminum
- 15,000mm/s — fastest in class
- Dual 48MP AI cameras — 0.2mm positioning accuracy
- Auto Streamline™ conveyor for automated batch production
- 3D embossing 5× faster than 20W fiber
- Fully enclosed — enclosed cover, fire detection, eye-protection
- Front-removable fan cover — tool-free maintenance
✖ Cons
- Not LightBurn compatible — XCS only, significant for established workflows
- Class 4 — requires eye protection and safe operating environment
- 40W diode lacks air assist — reduces cutting edge quality vs dedicated diode machines
- ~$6,499 — significant investment; single MOPA version at $4,999 may be better value for metal-focused workflows
- 220×220mm base work area — smaller than open-frame alternatives
- Color engraving requires parameter testing — not one-click for new materials
Is the xTool F2 Ultra Right for You?
✓ Buy the F2 Ultra if you…
- ✓Need full-color marking on metals (impossible otherwise)
- ✓Need to cut 2mm brass or stainless steel for jewelry or parts
- ✓Run a production business and need 50–300 piece batch capability
- ✓Do 3D embossing / coin / medal work regularly
- ✓Are comfortable using XCS and don't require LightBurn
- ✓Want one machine covering metals and non-metals at production speed
› Consider alternatives if you…
- ›Rely on LightBurn and can't switch workflows (→ F1 Ultra or Sculpfun G9)
- ›Only need standard metal engraving without color (→ xTool F1 Ultra ~$3,599)
- ›Need portability for on-site events (→ xTool F2 15W+5W, ~$1,299)
- ›Primarily cut thick wood and metal (→ open-frame 40W+ diode + separate fiber)
- ›Budget is under $4,000 (→ F1 Ultra or the F2 Ultra Single ~$4,999)
Auto Streamline™ — From One Piece to 300 Pieces
The Auto Streamline™ Conveyor is the accessory that transforms the F2 Ultra from a precision engraver into a production line. Attach the conveyor, load blanks onto the feed tray, configure the array pattern in XCS, and the machine processes pieces automatically — advancing the tray, engraving each piece, and continuing without operator intervention between items.
At 15,000mm/s, the speed per piece on simple engraving jobs is measurable in seconds. For a business fulfilling a 200-piece order of personalized dog tags or name necklaces, the conveyor workflow reduces labor to loading and unloading — the machine handles everything in between. Combined with the dual 48MP cameras' 0.2mm positioning accuracy, every piece in the batch comes out aligned consistently.
Browse the full range of MOPA, dual-laser, and professional fiber laser engravers →
