The Most Capable Portable Dual-Laser in 2025
The WeCreat Lumos Flex packs a 15W fiber laser and a 15W blue diode laser into a fully enclosed body that weighs just 2.8 kg in handheld mode. The fiber laser is the machine's defining feature — it delivers genuine metal cutting and color engraving that IR-based portables simply cannot match.
At 10,000mm/s the Lumos Flex is the fastest portable laser available, and the 50MP camera with 0.01mm positioning makes alignment and batch workflows faster than ever. Whether you're a jeweler, craft show seller, or mixed-material maker — this machine is built for business.
What Is the WeCreat Lumos Flex?
The WeCreat Lumos Flex is the brand's newest and most capable portable laser engraver, positioned as the "go-to dual laser for growing businesses." It follows the Lumos — a 3W IR + 10W diode machine that earned a devoted following for its compact form and color metal engraving — but significantly raises the ceiling on what a handheld laser can actually accomplish.
The headline upgrade is the move to a genuine 15W fiber laser. Unlike the IR lasers found in entry-level portable machines, a fiber laser uses a doped fiber optic medium to produce a 1064nm beam with far greater power density and pulse control. That translates to: cutting thin metals (up to 0.5mm brass), vibrant and consistent color engraving on stainless steel without marking spray, deep tactile 3D relief engraving, and metal processing speeds that are 2–5× faster than competing IR-based portables.
Paired alongside the fiber is a 15W blue diode laser for wood, leather, acrylic, fabric, and all other organic materials. Both lasers operate from the same galvo head — no lens swapping, no hardware changes. You switch modes entirely in software. The machine stays compact, the workflow stays fast, and the material range covers practically everything a growing craft business needs.
Full Specs
| Specification | WeCreat Lumos Flex |
|---|---|
| Fiber Laser Power | 15W (1064nm fiber) |
| Diode Laser Power | 15W (450nm blue) Upgraded |
| Max Engraving Speed | 10,000 mm/s |
| Work Area (Standard) | 116 × 116 mm |
| Work Area (Extended) | 4× area with Slide Extension Optional |
| Camera & Positioning | 50MP Smart Camera · 0.01mm accuracy |
| Max Cutting — Basswood | 15 mm (multi-pass) |
| Max Cutting — Thin Metal | 0.5mm brass (fiber, multi-pass) New |
| Handheld Mode Weight | 2.8 kg |
| Rotary + Extension Combo | Engrave cylinders up to 34 inches (864mm) |
| 1-Click 3D Relief | Convert 2D image → 3D emboss in software |
| Software | WeCreat MakeIt (free) · LightBurn compatible |
| Laser Mode Switching | Software-only — no hardware or lens change |
| Safety Features | Amber shield |
| Safety Class | Class 4 Eye Protection Required |
Why the 15W Fiber Laser Changes Everything
To understand why the Lumos Flex is a step-change rather than an incremental upgrade, you need to understand what a fiber laser actually does differently from an infrared (IR) diode. Both emit light at 1064nm, but a fiber laser uses a rare-earth-doped fiber optic cable as the gain medium — this produces a far cleaner, more concentrated beam with higher peak power per pulse.
In practice, this is the difference between a machine that can only mark metal and one that can genuinely process it. The Lumos Flex's fiber laser can achieve deep, tactile grooves in stainless steel — ridges you can actually feel with your fingertips, not just surface discoloration. It can cut 0.5mm brass sheets. It can produce true MOPA-style color engraving with consistent, vibrant results. And it does all of this while running 2.5× faster than the previous generation.
Cuts Thin Metal
Cuts up to 0.5mm brass sheets via controlled multi-pass — a first for any portable machine in this price class.
Color Metal Engraving
Vibrant, high-contrast MOPA-style color marking on stainless steel — no marking spray, no additives required.
Deep 3D Relief Engraving
Tactile 3D embossing on metal, slate, and stone. One-click 2D → 3D conversion in MakeIt software — no design experience needed.
10,000mm/s Speed
2.5× faster than the original Lumos. Finish batch jewelry orders, name tags, or keychains in a fraction of the previous time.
Software-Only Mode Switch
No lens changes, no hardware swaps. Switch between fiber and diode with a single click — ideal for mixed-material batch production.
Handheld Mode
Magnetic Protective Cone transforms the unit into a handheld laser at just 2.8 kg — engrave furniture, trophies, and irregular surfaces on-site.
Cutting & Engraving Performance
Between the two laser types, the Lumos Flex covers the vast majority of materials a growing craft business will ever need.
Material Compatibility
Fiber Laser (15W · 1064nm)
Diode Laser (15W · 450nm)
Fiber Laser Results: Color Engraving & 3D Relief
The 15W fiber laser produces results that set the Lumos Flex apart from every other portable machine on the market. MOPA-style color engraving on stainless steel yields vibrant, high-contrast marks — achieved entirely through laser parameter control, with zero marking spray or additives.
3D relief engraving creates tactile depth you can feel — genuine raised and recessed surfaces in metal and stone, not just surface color changes. One-click 2D → 3D conversion in WeCreat MakeIt means no design experience is required to produce professional-grade results.
Lumos Flex vs Lumos vs xTool F2: How Do They Compare?
These three machines define the portable dual-laser market in 2026. Here's how they stack up on the specs that matter:
| Feature | Lumos Flex ★ | Lumos | xTool F2 |
|---|---|---|---|
| Metal Laser Type | 15W Fiber | 3W IR | 5W IR |
| Diode Laser | 15W | 10W | 15W |
| Max Speed | 10,000 mm/s | 4,000 mm/s | 6,000 mm/s |
| Cuts Thin Metal | ✓ Up to 0.5mm brass | ✗ Mark only | ✗ Mark only |
| 3D Relief Engraving | ✓ 1-click | Limited | ✓ |
| Camera Accuracy | 0.01mm (50MP) | 0.1mm (50MP) | 0.1mm (50MP) |
| Max Cylinder Length | 34 inches (864mm) | 34 inches | ~400mm ext. |
| Handheld Mode | ✓ 2.8 kg | ✓ 2.3 kg | ✓ 4.6 kg |
The summary: the Lumos Flex is the only portable machine in this group with a real fiber laser capable of cutting metal. If your work involves precious metals, custom jewelry, or thin metal cutting, it's in a different category entirely. The xTool F2 is a strong runner-up for those who prioritize portability weight and don't need fiber-grade metal capability.
Who Should Buy the WeCreat Lumos Flex?
Jewelers & Metal Artists
The 15W fiber delivers precise deep engraving, color marking, and even thin-sheet metal cutting on gold, silver, brass, and steel — in a machine that fits on a jeweler's bench.
Craft Show & Pop-Up Sellers
At 2.8 kg in handheld mode, you can carry it on-site. The 10,000mm/s speed means you can engrave a custom order in front of a customer in seconds.
Awards & Trophies
The Magnetic Protective Cone lets you engrave plaques, trophies, and irregularly shaped awards you can't fit inside a traditional enclosure.
Custom Drinkware
Rotary + Slide Extension combo engraves tumblers, mugs, bottles, and even 34-inch baseball bats. One setup, unlimited cylinder lengths.
Mixed-Material Makers
One machine for wood gifts, leather patches, metal tags, and slate coasters. Software-only mode switching means no downtime between materials.
Corporate Gifting & Branding
High-volume color engraving on metal promotional items, branded stainless tumblers, and executive desk accessories — at speeds that make batch orders commercially viable.
Pros & Cons
✔ Pros
- True 15W fiber laser — cuts thin brass, real MOPA-grade color engraving
- 10,000mm/s speed — fastest portable laser in this class
- 50MP camera with 0.01mm positioning — 10× more accurate than competitors
- 1-click 2D → 3D relief conversion in MakeIt software
- 2.8 kg handheld mode — truly portable for on-site events
- World-first Rotary + Extension combo for 34-inch cylinders
- Software-only laser switching — zero hardware downtime
- MakeIt software is notably easier than LightBurn for new users
✖ Cons
- New product — limited long-term owner reviews available at launch
- 116×116mm native work area is compact for larger flat items
- Slide Extension needed for batch runs (sold separately)
- Class 4 — eye protection always required
- Air filtration accessory (AirGuard Cube) is additional cost
- Premium pricing vs. IR-based portable competitors
Is the Lumos Flex Right for You?
✓ Buy the Lumos Flex if you…
- ✓Work regularly with metals — jewelry, tags, awards
- ✓Need true MOPA-style color engraving on steel
- ✓Want to cut thin metal sheets (brass, etc.)
- ✓Need a portable machine for craft shows or pop-ups
- ✓Want 3D relief engraving without $5,000+ industrial tools
- ✓Process mixed materials and need fast mode switching
› Consider alternatives if you…
- ›Primarily work with wood/leather and don't need metal cutting
- ›Are budget-constrained (→ WeCreat Lumos is lower cost)
- ›Need a large format work area regularly (→ desktop machine)
- ›Need UV laser for subsurface glass engraving (→ xTool F2 Ultra UV)
- ›Prefer LightBurn-first workflow with open-frame machine
Recommended Accessories
The Lumos Flex's "Flex" name isn't just branding — the accessory ecosystem genuinely transforms what the machine can do:
Slide Extension
4× expanded workspace for batch runs. Pairs with the Rotary Pro to engrave 34-inch cylinders.
Rotary Pro
Engrave tumblers, rings, tubes, and cylindrical objects of any length when combined with the Slide Extension.
Magnetic Protective Cone
Converts Lumos Flex into a handheld laser for engraving large, irregular, or permanently-fixed surfaces.
AirGuard Cube
Compact fume extractor designed specifically for the Lumos/Lumos Flex. Essential for indoor and event use.
Browse the full selection of portable and dual-laser engravers →
The WeCreat Lumos Flex is the most capable portable dual-laser machine available in 2026 — and the first in its class to make fiber-grade metal processing genuinely accessible.
For jewelers, metal artists, and growing craft businesses that need real metal capability — not just surface marking — without the bulk of a desktop machine, the Lumos Flex is the answer. The 15W fiber laser, 10,000mm/s speed, 0.01mm camera precision, and one-click 3D relief add up to a machine that punches well above its class. The compact work area is a real limitation for flat large-format work, but the Slide Extension, Rotary Pro, and Magnetic Cone collectively ensure you're rarely limited by what you can engrave.
