1 / 20
FAST SHIPPING

Local warehouses in the U.S. and Europe

SUPPORT 24/7

Quick response online chat system

7 DAYS RETURN

Simply return it within 7 days for an exchange

PAYMENT SECURE

We ensure secure payment with PEV

Twotrees TTC450 PRO CNC Router Machine

$699.00 $479.00 SAVE $220.00

➤ Quick 10-Minute Assembly with 95% Pre-Assembled Parts
➤ Intuitive 3.5-Inch Touchscreen for Effortless Control
➤ Dust-Proof Design for Cleaner Operation and Longevity
➤ Powerful Motors for Smooth Carving on Multiple Materials

Package: TTC450 PRO

TTC450 PRO
+ End Mills
+4th Axis
+VCarve Desktop - Software

Plug Type: US Plug

US Plug
EU Plug
AU Plug
UK Plug

paypalklarnavisamasteramerican expressdiscoverjcbdiners clubmaestrogoogle pay

🚚 1–2 Day Dispatch | DHL / FedEx / UPS / USPS

Frequently Bought Together

Total price: $364.00
FAST SHIPPING

Local warehouses in the U.S. and Europe

SUPPORT 24/7

Quick response online chat system

7 DAYS RETURN

Simply return it within 7 days for an exchange

PAYMENT SECURE

We ensure secure payment with PEV

TwoTrees TTC450 PRO CNC Router Machine – 460×460mm Desktop CNC Milling & Engraving Machine with 3.5" Touchscreen, 10-Minute Setup, 30,000 RPM Spindle & TC20 Laser / 4th Axis Upgrade for Wood, Acrylic & Aluminum

The wood sign is 400mm square and needs V-carved lettering at 0.5mm depth. The acrylic panel needs a pocket cut for an LED insert. The aluminum bracket needs three holes and a slot at 0.1mm accuracy. These are not separate machines — they are three jobs on the same TwoTrees TTC450 PRO, back to back, on the same 460×460mm work surface. The PRO ships 95% pre-assembled and takes ten minutes to set up. Its 3.5-inch touchscreen runs jobs directly from a TF card without a connected computer. The GRBL firmware handles both CNC milling and laser engraving in one mode — no reflash, no reconfiguration. The 60mm upgraded X-axis motor and 8mm reinforced gantry side plates handle the load that lighter hobby CNC machines cannot sustain past the first few jobs. For makers who want a capable desktop CNC that is ready to work in ten minutes, grows with a 500W spindle and 4th axis, and converts to a laser engraver with a module swap, the TTC450 PRO is where the serious work starts.

95% Pre-Assembled, 10-Minute Setup – CNC Ready Without the Build

The TTC450 PRO ships 95% pre-assembled and factory aligned — the remaining steps take approximately ten minutes. The 3.5" IPS capacitive touchscreen (480×320, 11 languages) is operational from first power-on; no laptop required to run a job from TF card.

Wi-Fi 2.4GHz allows file transfer and control from a connected device. USB and TF card cover standalone offline operation. For users who have postponed a CNC upgrade because of assembly complexity, the PRO removes that barrier — unbox, assemble in 10 minutes, start cutting.

Upgraded 60mm X-Axis Motor + 8mm Reinforced Side Plates – Built for Real Cuts

The PRO's X-axis motor has been upgraded from 42mm to 60mm — more torque for cutting hardwood, dense MDF, and aluminum at aggressive feed rates without stalling. Gantry side plates are 8mm thick aluminum, significantly stiffer than thinner entry-level competitors.

The brass calibration adjustment nut enables precision correction of axis deviations after extended use, maintaining ±0.05mm engraving accuracy even as wear accumulates — a feature absent on machines with fixed plastic adjustment components.

3.5" Touchscreen + GRBL Dual-Mode Firmware – CNC and Laser, One Control Panel

The 3.5" IPS touchscreen runs GRBL open-source firmware that natively supports both CNC milling and laser engraving. When the optional TC20 20W laser module is fitted, no firmware reflash is required — switch modes via the touchscreen and start engraving.

The same GRBL firmware controls the 4th axis rotary, air assist kit, and 500W spindle — all via the same touchscreen. Compatible with Artcam, Fusion 360, EASEL, Carveco Maker, and VCarve Desktop on macOS, Windows, and Linux.

Dust-Proof Design + Spindle Guard + CE/FCC Safety – Protected for Daily Use

The PRO uses a dust-proof enclosure design for its electronics and motor mounts, reducing ingress of wood chips, MDF dust, and acrylic particulates that cause premature failure in open electronics on competing desktop CNCs. A spindle guard protects against contact with rotating tooling.

New limit switches prevent axis overtravel and machine crashes. Emergency stop provides immediate shutdown. Multi-certification compliance: CE-EMC, CE-LVD, CE-MD, CE-RED, ROHS, FCC-SDoC, FCC-ID — meeting electrical safety and RF emission standards for professional use.

500W Spindle + TC20 Laser + 4th Axis – Three Machines, One Platform

The 500W air-cooled brushless spindle replaces the standard 775 motor for hard material cutting — aluminum, carbon fiber, copper, dense hardwood — at 30,000 RPM with sustained torque. The TC20 20W laser module converts the PRO to a laser engraver without modifying the frame.

The 4th axis rotary enables cylindrical engraving on rings, pens, bottle caps, and tool handles. Each module mounts to the same frame — mode switching via the GRBL touchscreen, no separate machine required per capability.

Specifications

A. Work Area & Precision
ModelTwotrees TTC450 PRO
Work Area460 × 460 × 80mm (18.1 × 18.1 × 3.14 in)
Engraving Accuracy100 ± 0.05mm
CalibrationBrass adjustment nut — corrects axis deviation; maintains accuracy after extended use
Max Engraving Speed800 mm/min
Max Acceleration1,000 mm/s²
B. Spindle & Tooling
Standard Spindle775 brushed motor, 8,000–30,000 RPM
Optional Upgrade500W air-cooled brushless spindle motor (30,000 RPM; sold separately or in bundles)
Alternative RouterMakita-compatible 30,000 RPM wood router (sold separately)
Tool ChuckER11 collet
Tool Diameter0.5–7mm
Engraving Layer HeightNon-metal: 0.1–20mm per pass / Metal: 0.1–0.2mm per pass
C. Structure & Upgrades
FrameSheet metal + aluminum profile + injection molding + stainless steel
Gantry Side Plates8mm thick aluminum (reinforced vs. prior generation)
X-Axis Motor60mm (upgraded from 42mm on prior generation)
Dust ProtectionDust-proof electronics and motor mount enclosure
SafetySpindle guard / new limit switches / emergency stop button
Laser ConversionTC20 20W laser module (optional; no firmware reflash required)
4th AxisRotary module for cylindrical engraving (optional)
Dust ExtractionVacuum Cleaner M1 (optional accessory)
D. Controller & Connectivity
FirmwareGRBL open-source; supports CNC and laser modes natively
Display3.5" IPS capacitive touchscreen, 480×320 resolution
ConnectivityUSB / TF card (offline) / Wi-Fi 2.4GHz
Not SupportedWi-Fi 5GHz / Bluetooth / Ethernet / USB flash drives
Power24V 3A; INPUT: 100–240V AC 50/60Hz
E. Software & Compatibility
Compatible SoftwareArtcam / Fusion 360 / EASEL / Carveco Maker / VCarve Desktop (optional bundle)
Supported OSmacOS / Windows / Linux
Interface Languages11: English, Chinese, Spanish, German, French, Russian, Portuguese, Italian, Japanese, Korean, Turkish
File Formats.nci / Gcode
MaterialsPlywood, MDF, solid wood, acrylic, carbon fiber, aluminum, copper, stainless steel
F. Machine Specifications
Product Size742 × 689 × 413mm (29.21 × 27.13 × 16.26 in)
Net Weight15.45kg (34.06 lb)
Gross Weight20.6kg (45.41 lb)
ColorRed and Black
Assembly95% pre-assembled; ~10 minutes to complete
Operating Temperature0°–40°C
Safety CertificationsCE-EMC / CE-LVD / CE-MD / CE-RED / ROHS / FCC-SDoC / FCC-ID
G. Bundle Options
Machine OnlyTTC450 PRO (standard 775 spindle, spoil board, all tools)
+ End MillsMachine + end mill set
+ 4th AxisMachine + rotary 4th axis for cylindrical engraving
+ VCarve DesktopMachine + VCarve Desktop software license
Separate Upgrades500W spindle ($129) / 30,000 RPM wood router ($139) / Spindle cooling & dust blower kit ($96) / TC20 laser module

Expert Analysis

TTC450PRO

TTC450Pro Assembly Tutorial

TTC450Pro Laser Cut Earrings Pattern

Review